Equipment

Dingo Digger with bucket widths of:
- 760mm. Holds approx 120kg
- 1050mm. Holds approx 200kg
- 1200mm both 4 in 1 and mulch bucket. Holds approx 300kg with the mulch bucket almost at 400kg with damp loam or clay in the bucket.

We use the biggest bucket that can be squeezed into the job site.

Access capability from 760mm upwards.
Sample project - click here

Kubota Excavator with bucket widths of:
- 200mm
- 300mm
- 450mm
- 900mm.

The excavator is a zero swing machine which has much greater digging power than a Dingo or larger skid steer loader but unfortunately requires 990mm of clearance to get through. The Dingo backhoe has been custom modified to fit through the smaller gaps of 760mm, it does not have quite as much power as the excavator but it can get to those really difficult jobs.


Access capability from 990mm upwards.
Sample project - click here

Our auger sizes are:
- 200mm
- 300mm
- 450mm and
- 600mm

Holes can be bored with either the Dingo or the excavator, depending on the situation. The Dingo has much greater power for driving the augers, but the excavator can reach over, up, across, down and horizontally to do the really crazy jobs.

With a normal maximum digging depth of 3 metres.
Sample project - click here

This is a 100kg unit that fits on the excavator. For coping with the shale and granite that just seems to get in the way, and for demolition work.

Sample project - click here

Digs a trench 150mm wide and up to 900mm deep.

Is the quickest method of digging a trench for power and water supplies etc. We have done many kilometres of trenching over the years for electricians, plumbers and the horticultural industry at Virginia.


Sample project - click here

Single Axle Hino Tipper - capacity 6 tonnes.

Is the largest truck that can be loaded by Dingo’s and other small skid steer loaders.